[汽车修理知识]How to drive to reduce car tire wear

1. Don't start too hard, so as not to causetireDrag with the ground to accelerate tread wear;
2. When the vehicle is going downhill, the appropriate speed should be controlled according to the size, length and road conditions of the slope, so as to avoid or use less emergency braking and reducetireWear

3. Turning vehicles should be decelerated appropriately according to the conditions of the curve and the turning radius, so as not to accelerate unilateral tire wear due to inertial force and centrifugal force;
Fourth, when driving on uneven roads, one must choose the road surface to reduce the collision between the tire and the road surface to avoid damage to the parts and tires, and the other is to slow down to avoid tire bumps and strong vibration;
5. When turning, overtaking, passing through intersections, narrow roads, railway crossings, etc., you should master the appropriate speed and pay attention to the road surface, pedestrians, and vehicle dynamics, prepare for braking, reduce frequent braking, and avoid emergencies Braking, thereby reducing tire wear;
6. When driving in the highway maintenance and construction section, use the method of low speed and slow driving to choose the road to pass, to avoid excessive impact on the tires, or even stab or scratches;
7. Passing through muddy sections should choose a relatively solid and non-slip place to avoid the tires and sidewalls from being severely cut and scratched due to tire subsidence, idling on the spot, and severe vibration;
8. Vehicles should develop the habit of sliding safely when stopping and stopping at the station during driving;

Related:

·The assembly method when the timing mark of the timing gear is not clear[汽车维修常识]
·Prevent rear-end collisionBraking System