The main equipment and tools required for glaze sealing are: waxing and sealing machine (vibration polishing machine) or high-frequency sealing machine, non-woven fabric, paper tape, etc.
The first step: cleaning the car body. Clean the car body and be careful not to have any dirt residue. The residue will cause friction when wiping the car body and damage the paint. A little carelessness will damage its finish. After washing clean, check whether there is an oxide layer on the paint surface (wipe the paint surface of the car body with the tin foil surface of the cigarette box, if the paint surface is white, it means that the paint surface has an oxide layer) and scratches. If so, paint the car body first The surface is polished. After the polishing is completed, clean the car body (mainly to wipe off the abrasive). Drive the car to the dust-free workshop and wait for the glaze sealing.
Step 2: Use paper tape (masking paper) to paste all the rubber parts on the car body, such as car logos, letters, etc.If there is plasticGuard plate, And be sure to block the protective plate with newspapers, etc., to prevent the glaze from being hard to clean up.
The third step: sealing the glaze. Pour the glaze on the car body, use the glaze sealing machine to seal the glaze from the beginning to the end (smear evenly), wait for the glaze to fully penetrate the paint surface and dry it, wipe the glaze clean with a non-woven cloth (remember to make a straight motion when wiping , Don’t do circle movement). Repeat the above steps and seal it twice, so that the entire sealing process is over.
Step 4: After the glaze is sealed, all small scratches on the car body will be covered. Tear off the paper tape, newspaper, etc., and clean the surface to be pasted with suede or non-woven fabric.
1. Some beauty
The main equipment and tools required for glaze sealing are: waxing and sealing machine (vibration polishing machine) or high-frequency sealing machine, non-woven fabric, paper tape, etc.
The first step: cleaning the car body. Clean the car body and be careful not to have any dirt residue. The residue will cause friction when wiping the car body and damage the paint. A little carelessness will damage its finish. After washing clean, check whether there is an oxide layer on the paint surface (wipe the paint surface of the car body with the tin foil surface of the cigarette box, if the paint surface is white, it means that the paint surface has an oxide layer) and scratches. If so, paint the car body first The surface is polished. After the polishing is completed, clean the car body (mainly to wipe off the abrasive). Drive the car to the dust-free workshop and wait for the glaze sealing.
Step 2: Use paper tape (masking paper) to paste all the rubber parts on the car body, such as car logos, letters, etc.If there is plasticGuard plate, And be sure to block the protective plate with newspapers, etc., to prevent the glaze from being hard to clean up.
The third step: sealing the glaze. Pour the glaze on the car body, use the glaze sealing machine to seal the glaze from the beginning to the end (smear evenly), wait for the glaze to fully penetrate the paint surface and dry it, wipe the glaze clean with a non-woven cloth (remember to make a straight motion when wiping , Don’t do circle movement). Repeat the above steps and seal it twice, so that the entire sealing process is over.
Step 4: After the glaze is sealed, all small scratches on the car body will be covered. Tear off the paper tape, newspaper, etc., and clean the surface to be pasted with suede or non-woven fabric.
1. Some beauty shops use baking lamps to seal the glaze when sealing the glaze, the purpose is to make the glaze better penetrate the lacquer surface. However, if the time and distance are not well mastered, the glaze adhering to the lacquer will be dried before the lacquer is softened when the lacquer is baked with a baking lamp, and the glaze sealing effect will not be good.
2. Sealing the glaze on the lacquer, so that the surface of the car paint is covered with a strong protective film, extending the life of the lacquer, no waxing is required within one year, but washing the car will destroy the glaze, so it is best not to go to the computer Car wash in the car wash room. When washing the car, do not use alkaline detergent to clean, but use neutral detergent to clean, otherwise it will destroy the glaze sealing effect.
3. When sealing the glaze, you must choose high-quality glazes, such as Chinap in the United States, Semona in the United Kingdom, and high-tech glazes produced in France, Germany and other places, and the effect is very good.
Compare waxing and sealing glaze
carWaxing and the use of crystal glaze, both of which are beauty methods for car beauty and protect the gloss of car paint. Therefore, in terms of function, the two have the same place, but compared with car waxing, the use of crystal glaze has its own obvious The advantages.
1. The crystal glaze is insoluble in water, which can avoid the defect of fear of water after the car is waxed. Since the wax used in car waxing is soluble in water, if the car hits rainy weather just after waxing, the wax will be dissolved by the rain, and it will not play the role of protecting the paint and beauty. At the same time, because the wax is soluble in water, it also causes a lot of inconvenience to the car wash after waxing, and the crystal bright glaze is insoluble in water, so after finishing the crystal bright glaze, there is no need to worry about the phenomenon of being dissolved by water, and it can be long-term Protect the paint surface of the car.
2. Do not damage the original paint surface. Compared with waxing, the second advantage of sealing glaze is that it will not damage the paint surface of the car. Since traditional car waxing must be washed first and then waxed, frequent car washing will naturally cause harm to the paint surface of the car. To make it thinner, crystal bright glaze uses a technology similar to nanometers to make the flowing glaze adhere to the surface of the car paint and harden in a transparent shape, which is equivalent to putting a layer of transparent and hard on the car paint." Protective clothing", so it can play a role in protecting the paint surface of the car.
Third, the protection time is long. After the car is sealed in a package, it can be protected for about one year, and at the same time, it avoids the trouble of frequent car washing. The dust on the surface of the car can be easily wiped off.
Talking about the beauty of automobile sealing glaze
The role of sealing glaze
Glaze-sealing beauty, as the name implies, is to form a protective film on the surface of the car paint that is similar to the outer coating of pottery products such as "Tang Sancai", which has the functions of blocking ultraviolet rays, anti-oxidation, and resisting high temperature and acid rain. Sealing and beautifying the glaze on a new car can prolong the service life of the paint and slow down the fading; of course, if the glaze can be sealed on the old car, the effect will be more obvious, because one of the processes can restore and brighten the oxidized and faded car paint. There is a refurbishment effect. Most of the prototype cars at the auto show have undergone this treatment, so they look crystal clear and radiant.
Because the special tools used for glaze sealing can heat the "glaze" and squeeze it into the pores of the car paint, its durability is much stronger than that of ordinary waxing and other beauty processes, and it can be maintained for about 1 year even without any treatment. . If you can guarantee that you will receive related care every three or four months, it can be as new for many years. The price of the glaze is slightly more expensive, depending on the grade and the old and new conditions of the car.
A car that has been glazing and beautified will appear in front of you, parked in the scorching sun, and no longer have to worry about the paint fading and cracking. Finally, there is a special reminder: Due to air pollution, especially in the north due to heavy sandstorms and heavy acid rain, it is best to take care of it every three or four months after sealing the glaze, so that you can drive a "new car for many years." "NS.
