I borrow your eyes to identify the water car from the details

In summer, it is easy to encounter heavy rain.Unfortunately, manycarIt became a flooded car. Most car owners will drag the soaked car to a repair shop for disposal and then sell it. The bubble car is like a time bomb. The circuit and body parts of the car are corroded. In the course of driving, life-threatening situations such as stalling of the vehicle and failure of high-speed braking may occur. Water vehicles have so many hidden dangers, how can we identify them? Next, I will introduce some techniques for identifying water suction trucks.

Note: The used car selection techniques introduced in this article are based on the experience shared by the editors. Buying a used car is risky. We do not guarantee that it is absolutely safe to choose a used car that contains the content described in this article. The following content is for reference only.

(1) External In the process of repairing the bubble car, as long asFog lightsIf it can be lit, the repair shop will not deliberately replace the fog lights, so to a certain extent, the fog lights will display the true information of the vehicle. Generally speaking, the vehicle-mounted tools in the trunk are not often used. If the vehicle-mounted tools rust, 80% of them will be affected by water.If sparetireIs new butWheel hubRusty, then this car is suspicious. Of course, there is a direct and clear way to open the decorative cover on the torso and remove the foam block from the tool. If you find that the bottom is like a bedwetting, there will be a circle of water stains and pass directly. First of all, it depends on whether aluminum parts such as engine chassis and gearbox chassis resemble "mildew".Secondly, it depends onexhaust pipeCorrosion. After the vehicle is used for a long time, it is normal for the exhaust pipe to have slight rust or redness, but if some parts of the chassis rust and fall off. Well, I suggest you don't think about it. In the process of vehicle maintenance, the fire protection layer between the engine room and the cockpit will not be replaced or even cleaned, so the fire protection layer can show the true condition of the vehicle. If the fire protection layer is submerged by water, there is basically no need to continue to observe. In addition, when the engine compartment is completely wading,fuseThere will be water stains and rust inside the box, so judging whether the vehicle is immersed through the fuse box is a more direct method.

(2) Internal A car cockpit soaked in water will still have a musty aftertaste even after thorough cleaning in the later stage. We usually do not wipe when we wash the carSeatThe bottom bracket, so a normal car will not rust the bottom bracket of the seat, and only a car with a severely wetted cockpit will rust the bracket.

Most of the seat fillers on the market are sponges, so they lose their elasticity when they are soaked in water and hardened by hand. In the subsequent cleaning of the flooded car,seat beltThe mildew on the surface is easy to be overlooked. After the seat belt is soaked, there will still be water stains, and it is not easy to clean up the mildew spots in the later stage.

Compared with a car that is not soaked in water, the button on the T panel of a car soaked in water will converge when pressed, and the rebound efficiency is low. The identification of flooded vehicles is not a particularly difficult task, as long as we grasp some key points when picking up the car, look carefully, or find clues.