How to deal with the water in the car headlights and how to deal with the water in the fog lights


Product Overview
The arrival of the rainy season is believed to have an impact on some auto parts, and the flooding of headlights is one of the phenomena. So what should I do if the headlights of a car are flooded? In fact, two situation
Key Features
- Meet or exceed OEM requirements
- 2 years warranty
- Strict quality control
- Complete testing from material to product
Quality Assurance
The arrival of the rainy season is believed to have an impact on some auto parts, and the flooding of headlights is one of the phenomena. So what should I do if the headlights of a car are flooded? In fact, two situations need to be considered. Let's discuss it together.
Slight water ingress
If it is a slight water ingress, you don’t have to worry too much. After the car lights are turned on for a period of time, the heat generated is used to make the mist inside to exit the lights through the vent pipe, and the whole process will basically not cause any impact. Of course, we still have a foolish method, using a hot air blower against the camera for a few minutes to remove the moisture inside. But it should be noted that it should be heated evenly during hot air, and never keep it in the same position all the time, otherwise the headlight assembly may be damaged.
Severe water ingress
If it is serious water ingress, you have to mention it separately, and even goldfish can be raised inside. You need to take apart the lampshade in time, take it apart, and then let the water out to dry. Of course, we also need to check whether there are cracks or leaks in the headlights. If there are any, they will naturally need to be dealt with.
As for how to deal with the water ingress of the fog lamp, in fact, it is similar to the above-mentioned aspects, and it also needs to be divided into two situations (slight water ingress and severe water ingress). But whether it is water in the car headlights or fog lights, if it is really necessary to disassemble and assemble, we'd better leave it to a professional. It is very likely that there will be water ingress at that time.
| Material | High-tensile steel / forged aluminum |
|---|---|
| Finish | E-coat / powder paint / zinc plating |
| Standards | IATF / ISO-based process control |
| Warranty | 24 months |
| MOQ | 50-100 pcs per reference |
| Lead Time | 25-35 days after PO |
Compatible Brands:
Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...
Request a Quote
Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

