Resetting the Toyota Corolla maintenance light to zero, how to reset the Corolla maintenance light to zero

toyotaCorollaThe driving computer is set with a maintenance reminder function. According to the preset drivingmileageOr when the engine is working, a maintenance prompt will appear on the instrument or accompanied by a sound. This kind of prompt can be set in the 4S shop by connecting to the diagnostic computer or directly on the vehicle. After maintenance, the prompt can be manually canceled and reset to enter the next cycle. If the maintenance light does not return to zero, the trip computer will not be able to record the mileage for your next maintenance. The manual zeroing method is as follows;

1. Turn the ignition switch ON and then OFF.

2. Press and hold the reset button of the "Daily Mileage" display on the instrument cluster.

3. Turn the ignition switch to ON. At this time, the maintenance light will light up for 3 seconds, then flash for 2 seconds, then light up for 1 second and then go out.

4. Release the reset button and reset to zero.

5. Turn the ignition switch OFF.

The function of the maintenance light is to record the mileage of some important accessories. Just like the timer in a sprint race, it serves to remind car owners and car maintenance staff. If the car owner replaces the relevant parts and does not reset the maintenance light to zero, the corresponding car maintenance light will be reset to zero. If the car owner replaces the relevant parts but fails to reset them to zero, it will not affect the performance of the vehicle, but it will cause trouble when replacing car parts next time: the time of use of the new parts cannot be accurately known.