The new Corolla maintenance light is reset to zero. The new Corolla maintenance light is reset to zero.

The NewCorollaThe trip computer is maintainedmileageTip, if maintenance is not done after the mileage is reached, the maintenance light will come on. After maintenance is done, the service station will help you reset the maintenance light to zero, start recording the driving mileage, and prompt you for the next maintenance mileage. If you don't go to a service station and perform maintenance yourself, you can reset the maintenance light to zero and follow the instructions. If it is not reset to zero, your maintenance mileage will not be recorded. The manual zeroing method is as follows;

1. Turn the ignition switch ON and then OFF.

2. Press and hold the reset button of the "Daily Mileage" display on the instrument cluster.

3. Turn the ignition switch to ON. At this time, the maintenance light will light up for 3 seconds, then flash for 2 seconds, then light up for 1 second and then go out.

4. Release the reset button and reset to zero.

5. Turn the ignition switch OFF.

The function of the maintenance light is to record the mileage of some important accessories. Just like the timer in a sprint race, it serves to remind car owners and car maintenance staff. If the car owner replaces the relevant parts and does not reset the maintenance light to zero, the corresponding car maintenance light will be reset to zero. If the car owner replaces the relevant parts but fails to reset them to zero, it will not affect the performance of the vehicle, but it will cause trouble when replacing car parts next time: the time of use of the new parts cannot be accurately known.