Nissan Bluebird maintenance light resets, Bluebird oil maintenance light resets

NissanbluebirdHow to reset the maintenance light to zero:

(1) For Nissan Bluebird, with the engine turned off, press and hold the short-range distance counter reset button under the tachometer.

(2) Turn the Nissan Bluebird ignition switch to the ON position, release the short-range distance counter reset button, and the "SERVICE" mark will appear on the display.

(3) Pull out the minute button on the clock, turn the minute button to the right, and the display will appearmileageshow.

(4) Turn off the engine and reset the reminder information.

(5) Turn the ignition switch to the ON position and the "SERVICE" mark will disappear.

How to reset the Nissan Bluebird maintenance light:

1. Turn the ignition key to position "0"

2. Press and hold the button for the mileage display (lower left on the instrument cluster) and turn the ignition key to position "1"

3. Continue to hold the button for about 5 seconds until OELSERVICE or INSPEKTION is displayed, and wait until RESET or RE flashes.

4. Press and hold the button briefly while the display flashes to reset the maintenance cycle.After the display briefly shows the new period, it switches tobrake fluidReplacement cycle.The following message appears on the display: The clock symbol and REST "(Reset)" or "RE" flash

5. Press and hold the button again for about 5 seconds until REST "(Reset)" is displayed or "RE" flashes

6. Press and hold the button briefly while the display flashes to reset the brake fluid cycle.