How to disassemble the Toyota Crown throttle valve, and how to clean the Crown throttle valve

fortoyotacrownRegarding how to disassemble the throttle valve, it is recommended that friends who are not familiar with it should not try it easily. After all, disassembling the throttle valve is a complicated process. Certain equipment is required to dismantle it. But we can still do general cleaning, and this disassembly is a simple disassembly. You only need to use a wrench to unscrew the screws that fix the valve hose to remove it, and you will see the throttle valve opening. Then proceed with simple cleaning. For complicated things, such as dismantling the whole thing for cleaning, it is recommended to go to a professional place to do it.

Pay attention to the method when cleaning the throttle. First, remove the intake pipe to expose the throttle, remove the negative electrode of the battery, turn off the ignition switch, straighten the throttle flap, and spray a small amount of "carburetor cleaning agent" into the throttle. Then use a polyester rag or high-woven "non-woven fabric" to carefully scrub. Deep inside the throttle and out of reach, you can use a clip to hold the rag and scrub carefully. After cleaning, follow the disassembly procedure just now. After installation, you must start initializing the throttle. After cleaning the throttle, initialization is necessary because when the computer adjusts the throttle opening, it has a memory function. If there is a sludge blockage, in order to ensure the air intake, the computer will automatically adjust the throttle opening to keep the air intake in a normal state.