How much does it cost to clean the Audi Q3 throttle valve? How long does it take to clean the Audi Q3 throttle valve?

AudiQ3The throttle valve generally needs to be cleaned after 50,000 kilometers, of course, it also depends on the engine condition.The cleaning price is generally around five hundredYuanup and down. Let me introduce to you how to clean the throttle valve.

After the Audi Q3 throttle valve is fully sprayed in place, it should be wiped with cotton cloth. In order to wipe it more thoroughly, we can take off our gloves and directly touch the cotton cloth with our hands to wipe the inside of the throttle. Although the cleaning agent will be corrosive to a certain extent, it is okay to contact it for a short time. We just need to wash our hands in time after cleaning.

It needs to be emphasized here that the flap in the middle of the throttle valve should be tried not to be touched by hand, because the flap itself is relatively fragile and is also a high-precision accessory. Manual operation can easily affect its opening, thereby affecting the vehicle condition. If it is really dirty and you have to use your hands to clean it, do so gently and carefully.

After cleaning, you can check inside and outside again. If there are no problems, you can install it. The method of installing the throttle is to reverse the order of disassembly, but there are also some experiences you can learn from.

InstallThrottle:

The four screws that fix the throttle can be tightened by hand first. Because your hands are relatively sensitive, avoid twisting the screws directly with a sleeve. After tightening by hand, you can use tools to tighten them. Then plug in the plug. It requires a little force to install the plug. You will hear a "click" sound to indicate that it is fixed.

After the throttle is installed, you can install the hose. There will be two small grooves on both sides of the hose, one large and one small. Just align them with the large and small raised marks on both sides. The hose should be completely inserted into both ends. If it is difficult to install, you can install it while twisting it left and right. After the concave and convex points at both ends are completely aligned, touch the bottom of the hose with your hand to ensure that the lower part is completely inserted, tighten the screws on the iron hoop, install the engine decorative cover, and the cleaning work is completely over.

After cleaning the throttle, there will be no other adverse reactions except that the idle speed will increase, and the increase in idle speed is a normal phenomenon. Even if it is cleaned at a 4S store, the idle speed will increase, but the increase will not occur if you do not clean it yourself. So high. But don't worry. Today's vehicles have self-learning functions. After cleaning, the idle speed will return to normal after driving for a period of time (about 50 kilometers). You don't have to worry too much.