Skoda Superb first guarantee project, Superb first guarantee matters needing attention

SkodaSpeedyFirst insurance items:

1. Check and tighten all the nuts in the front compartment of the Skoda Superb engine and the mechanical connection parts of the entire vehicle (no one is missing);

2. Check the tire tread and air pressure, remove small stones on the tires by the way, inflate the front and rear tire pressures to 2.4KG/CM2, and check the four-wheel alignment;

3. Replace the Skoda Superb engine oil and engine filter element. Judging from the replaced engine oil, whether the engine's machining accuracy is good or not, the engine oil is not very black, has good fluidity, and is not very thick in viscosity, which proves the machining accuracy. Good; If the released engine oil is very black and thick, it means that the mechanical metal surfaces of the engine and transmission box are greatly worn during the running-in period. The amount of wear is inversely proportional to the machining precision (that is, high machining precision means low wear, low machining precision means high wear).

4. Inspect and debug the lighting of the Skoda Superb;

Notes on Skoda Superb first warranty:

1. Remove the iron filings produced during the running-in period; during the running-in period, Skoda Superb will produce some foreign objects while driving, iron filings are one of them, and iron filings will make it difficult to start the car and cause insufficient fuel. occur.

2. Check carefully; when the Skoda Superb performs the first warranty, it is necessary to check the screw caps in all parts of the vehicle. If there is any looseness, tighten it immediately;

3. Add lubricant to each joint position of the Skoda Superb, such as the hinges of the front and rear doors, add coolant to the engine, and checkBrake Fluidfluids and batteries;