Huansu s3 first guarantee project, Huansu s3 first guarantee matters needing attention

Huansu S3 first guarantee items:

1. Check and tighten all the nuts in the front compartment of the Huansu S3 engine and the mechanical connection parts of the entire vehicle (no one is missing);

2. Check the tire tread and air pressure, remove small stones on the tires by the way, inflate the front and rear tire pressures to 2.4KG/CM2, and check the four-wheel alignment;

3. Replace the Huansu S3 engine oil and engine filter element. Judging from the replaced oil condition, whether the engine's machining accuracy is good or not, the oil color is not very black, the fluidity is good, and the viscosity is not very thick, which proves the machining accuracy. Good; If the released engine oil is very black and thick, it means that the mechanical metal surfaces of the engine and transmission box are greatly worn during the running-in period. The amount of wear is inversely proportional to the machining precision (that is, high machining precision means low wear, low machining precision means high wear).

4. Inspect and debug the entire vehicle lighting of Huansu S3;

Notes on the first guarantee of Magic Speed ​​S3:

1. Remove the iron filings produced during the running-in period; during the running-in period of the Magic Speed ​​S3, some foreign objects will be produced while driving, iron filings are one of them, and iron filings will make it difficult to start the car and cause insufficient fuel. occur.

2. The inspection must be careful; when the Huansu S3 is undergoing the first warranty, the screw caps in all parts of the car must be inspected. If there is any looseness, tighten it immediately;

3. Add lubricant to each joint position of Magic Speed ​​S3, such as the hinges of the front and rear doors, add coolant to the engine, and checkBrake Fluidfluids and batteries;