How to disassemble the Kaiyi X3 throttle valve, and how to clean the Kaiyi X3 throttle valve

Kaiyix3 throttle valve disassembly and cleaning method; the throttle valve is a controllable valve used to control the air entering the engine. After the gas enters the intake pipe, it will mix with gasoline to form a combustible mixture, thereby burning and doing work. The upper part is the air filter, and the lower part It is the engine block and the throat of the car engine. The depth of stepping on the accelerator is directly related to the opening of the throttle. Therefore, idle speed, power and other performance are closely related to the cleanliness of the throttle.

Remove the throttle: First determine the position of the throttle. The throttle is located behind the air intake. The position of each car will be different. The throttle of some models will be covered by the engine cover. Open the engine cover and first remove the hose connecting the air filter and the throttle. The two ends of the hose are fixed with round iron hoops. There are screws on the iron hoops. Loosen the screws to remove the hose. Back off. After removing the hose, you can see the throttle. The throttle is usually fixed with 4 screws. After the 4 screws are removed, take off the throttle. After removing the throttle, cover the entrance of the air inlet with a newspaper or other objects to prevent Debris has entered.

Clean the throttle: Wear gloves, install the nozzle of the cleaning spray, and spray the inside of the throttle. It is recommended to face the trash can when cleaning, because the carbon deposits will be liquefied and flowed down during spraying, which can easily pollute the environment. The cleaning agent has a pungent smell and is corrosive to a certain extent. Wear a mask and keep away from your mouth, nose and eyes when operating. After spraying is in place, wipe it with cotton cloth. After cleaning, you can inspect it inside and outside before installation.