Zotye T600 first warranty project, T600 first warranty precautions

ZotyeT600First insurance items:

1. Check and tighten all the nuts in the front compartment of the Zotye T600 engine and the mechanical connection parts of the entire vehicle (no one should be missing);

2. Check the tire tread and air pressure, remove small stones on the tires by the way, inflate the front and rear tire pressures to 2.4KG/CM2, and check the four-wheel alignment;

3. Replace the Zotye T600 engine oil and engine filter element. Judging from the replaced engine oil, whether the engine's machining accuracy is good or not, the oil color is not very black, the fluidity is good, and the viscosity is not very thick, which proves that the machining accuracy is good. ; If the released engine oil is very black and thick, it means that the mechanical metal surfaces of the engine and transmission box are greatly worn during the running-in period. The amount of wear is inversely proportional to the machining precision (that is, high machining precision means low wear, low machining precision means high wear).

4. Inspect and debug the entire Zotye T600 vehicle lighting;

Things to note when purchasing Zotye T600 first warranty:

1. Remove the iron filings produced during the running-in period; Zotye T600 will produce some foreign objects while driving during the running-in period, iron filings are one of them, and iron filings will make it difficult to start the car and cause insufficient fuel. .

2. The inspection must be careful; when the Zotye T600 is undergoing the first warranty, the screw caps in all parts of the vehicle must be inspected. If there is any looseness, tighten it immediately;

3. Add lubricant to each joint position of Zotye T600, such as the hinges of the front and rear doors, add coolant to the engine, and checkBrake Fluidfluids and batteries;