How to clean Mazda cx4 throttle valve, Mazda cx4 throttle valve cleaning method

MazdaHow to clean the cx4 throttle valve, Mazda cx4 throttle valve cleaning method:first,Need to be dismantled firstPlastic heat shield cover over the engine.

After removing the engine hood, you can see the throttle valve. There are some air pipes connected around the throttle. These pipes need to be removed and the locations of each pipe must be noted clearly.

After removing the air pipe on the throttle valve, we can remove the entire throttle valve.TiidaThe throttle valve is fixed to the engine block with 4 bolts and we can quickly remove it using appropriate tools.

The side of the throttle close to the combustion chamber is generally dirty. There are traces of black carbon deposits, which is the main part we need to clean.

MazdaHow to clean the cx4 throttle valve, Mazda cx4 throttle valve cleaning method:first,Need to be dismantled firstPlastic heat shield cover over the engine.

After removing the engine hood, you can see the throttle valve. There are some air pipes connected around the throttle. These pipes need to be removed and the locations of each pipe must be noted clearly.

After removing the air pipe on the throttle valve, we can remove the entire throttle valve.TiidaThe throttle valve is fixed to the engine block with 4 bolts and we can quickly remove it using appropriate tools.

The side of the throttle close to the combustion chamber is generally dirty. There are traces of black carbon deposits, which is the main part we need to clean.

Cleaning the throttle is mainly to remove the carbon deposits on it. We can use special throttle cleaning fluid or cleaning agent. It should be noted here that the cleaning principle of this type of cleaning agent is to dissolve carbon deposits, and its ingredients are more harmful to the human body. It is best to wear gloves and a mask when cleaning.

Spray the cleaner onto the throttle valve where there is a lot of carbon deposits and wait for it to dissolve the carbon deposits, which should take about 5-10 minutes. Using a brush can speed up the removal of carbon deposits.

When we see that the stains on the throttle have been completely dissolved, we can use a clean towel to wipe the cleaner inside the throttle.

Install the cleaned throttle valve to the engine body according to its original position, then install all air pipes to complete the entire process of cleaning the throttle valve. After all hardware is installed, the throttle needs to be initialized.