How to disassemble the Honda Jade throttle valve, and how to clean the Jade throttle valve

HondaJedThe method of disassembling and cleaning the throttle valve is as follows:

The method of removing the throttle valve is as follows:

1. Remove the connector between the intake pipe and the air filter box with powerful pliers.

2. Remove the crankshaft ventilation pipe and use a T20 internal flower wrench.

3. Remove the empty filter box, pull it up with your hands, and then clean the upper part of the throttle valve. If you want to clean it completely, please remove the four screws and take off the throttle.

The cleaning method of throttle valve is as follows:

Step 1: Prepare tools: a No. 10 small wrench (remove and install the battery terminal), a large cross screwdriver (remove and install the intake elbow), a T30 internal flower wrench (remove and install the throttle), carburetor A bottle of appliance cleaner.

Step 2: Remove the throttle intake elbow.

Step 3: Unplug the throttle harness plug.

Step 4: Remove the throttle body.

[Tips]The function of the car throttle: Controls air entry, and can automatically control the amount of oil through the throttle position sensor. In other words, it is the device that controls the throttle.

Classification: One is controlled by a pull wire, which is a semi-mechanical and semi-electronic throttle, and the other is a fully electronic throttle that sends a signal through a sensor. The computer calculates the throttle opening angle based on the intake air volume and the sensor angle.

The dangers of not cleaning the throttle valve

1. Irregular cleaning will cause errors in the opening of the throttle valve.

2. It will cause air with impurities to enter the engine combustion chamber.

These two results lead to abnormal engine operation, mainly manifesting as unstable idling; sudden instantaneous stalling at high speeds (the feeling of suddenly closing the accelerator); reduced power; in severe cases, it will cause difficulty in starting and increase fuel consumption.