• Welcome

The low beam and brake bulbs are easy to break, but the high beam is not easy to break?

Blog 3年前 (2021-08-17) 447 Views

  brake lightAnd low bulbs are usually halogen lamps and LED lamps, it is normal for halogen lamps to be broken. Repair shops often replace light bulbs, and the price is not high. And the LED will not always be broken. If it is often broken, it will definitely be a problem. Of course, it will not be often encountered.If the LED brake light is broken, it needs to be replacedtaillightAssembly. It is integrated with the taillight and cannot be replaced separately.ifHeadlampThe LED bulb is damaged and can be replaced separately,Low beam andbrakeThe bulb is easy to break, but the high beam is not easy to break?
The low beam and brake bulbs are easy to break, but the high beam is not easy to break?
Why do halogen bulbs often break? Because halogen lamps have the shortest bulb life. They are constructed in the same way as incandescent lamps are used at home. There is a bent tungsten wire inside the bulb, which emits light through electric heating. If the tungsten wire is broken, the light will not turn on. Because the tungsten wire is broken, all the halogen bulbs are off. The inside of the bulb can also be seen with the naked eye. The life of a halogen bulb is about five or six hundred hours, so if you walk at night and turn on the light for a long time, your life will be very short and it will deteriorate in a short time.
The low beam and brake bulbs are easy to break, but the high beam is not easy to break?
Simply put, if you turn on the light for one hour a day, the light bulb can work for five to six hundred days, and it will be broken in about one and a half to two years.Of course, manycarYou may not walk for a few days at night, but it can also be useful for four or five years without crashing. How long it will be bad depends on the frequency and duration of use, and how bad it is. This can also explain why bulbs are often broken, and high-beam lamps are not easy to damage halogen lamps. Due to the low usage of high light, high light is not needed for city driving at all, and it may not be turned on several times a year. Of course, this will take a long time.
The low beam and brake bulbs are easy to break, but the high beam is not easy to break?
The attenuation of the halogen bulb is also obvious. After a few hundred hours, even if the bulb is not turned off, the performance has been greatly attenuated, and the brightness can no longer meet the requirements. If the annual review goes online, the brightness of the bulb will fail, and a new bulb needs to be replaced. The above calculation is just an ideal situation. Sometimes bulb damage is also related to the quality of the bulb. Some bulbs are of poor quality and cannot be used for a long time.
The low beam and brake bulbs are easy to break, but the high beam is not easy to break?
The brake bulb is slightly different from the large bulb. The total time it is turned on is not very long, but the number of times it is turned on is a lot.Just step onBrake, It will open. If there are too many vehicles on the road, the brake light bulb will always turn on and off. In this way, its lifespan will be greatly shortened, and it cannot be measured by the total length of light.Just like a light bulb at home, if you repeatswitch, The life span will be shortened. It may be repeated hundreds of times, and then it will burn. Therefore, the bad frequency of the halogen lamp and brake light is high and normal, and it cannot be maintained if it is broken. It is not expensive to replace the light bulb directly. The brake light is several yuan, and the low-light lamp is tens of yuan. But if you use it sparingly, it will break quickly, or if it always goes wrong on one side, you may have problems. When replacing the lamp, check the lamp holder. This may be caused by a problem with the lamp holder or rusty contact with the lamp. Just polish it up.