What is your terms of packaging?

We offer brand packing box and neutral packing. We can also offer packing box for brake pads according to your designs.

What is your terms of payment?

Generally, by T/T 30% as deposit, and 70% before shipment.

What is your terms of delivery time?

Generally, it will take 30 to 60 days after receiving your advance payment, it depends on the items and the quantity of your order.

Can you manufacture according to the samples?

Sure, we can develop by the samples or detailed drawings by free.

What is your sample policy?

We can supply the samples free, but the customers have to pay the courier freight cost, the cost will be deducted in your first order.

What’s your the minimal order quantity?

The brake pads MOQ is 100 sets for each item.

Car maintenance knowledge The maintenance points of car brake shoes

Most cars use front and rear drumsBrakeStructure, under normal circumstances, the front brake shoe wears relatively quickly, and the rear brake shoe has a relatively long use time. The following aspects should be paid attention to in daily inspection and maintenance:

1. Under normal driving conditions, check the brake shoes every 5000 kilometers, not only check the remaining thickness, but also check the wear status of the shoes, whether the degree of wear on both sides is the same, whether the return is free, etc., and it is found to be abnormal The situation must be dealt with immediately.

2. The brake shoe is generally composed of two parts, an iron lining plate and a friction material. You must not wait for the friction material to wear out before replacing the shoe. For example, the front brake shoe of the Jetta car, the thickness of the new piece is 14 mm, and the replacement limit thickness is 7 mm, including the thickness of the iron liner of more than 3 mm and the thickness of the friction material of nearly 4 mm. Some vehicles have a brake shoe alarm function. Once the wear limit is reached, the meter will give an alarm to remind you to replace the shoe. The shoe that has reached the limit of use must be replaced. Even if it can be used for a period of time, it will reduce the braking effect and affect the safety of driving.

3. When replacing, replace the original spare parts provided by the factoryBrake pads, The only way to makebrakePiece andBrake discThe braking effect in between is the best and the wear is the least.

4. Special tools must be used to push back the brake cylinder when replacing the shoe. Do not use other crowbars to press it back hard, as this will easily cause the brake caliper guide screw to bend and cause the brake pad to jam.

5. After replacement, be sure to step on the brakes several times to eliminate the gap between the shoe and the brake disc, causing the first foot to fail to brake, which is prone to accidents.

6. After the brake shoe is replaced, it needs to run in for 200 kilometers to achieve the best braking effect. The newly replaced shoe must be driven carefully. (New Evening News)