I believe that many car owners will have encountered the feeling of braking, feeling that the braking effect on both sides is different, or the degree of wear of the brake pads is different. Then, if this happens, it is generally because of a problem with the brake cylinder. But even some old drivers may not know how to check and repair. In order to solve this big problem, next we will give you a repair video of the brake cylinder. You can use this video to operate during repairs.
Brake cylinder repair video
1. First remove the bolts of the brake cylinder to see if the piston seal is damaged or there is serious oil leakage. If there is any, it needs to be replaced as soon as possible.
2. The second place is the card pin. This position is very important. Check if there is any stuck phenomenon. If it exists, it will accelerate the wear of one side of the brake pad, resulting in a situation where one side is thin and the other is thick. At this time, the repair kit of the brake cylinder needs to be replaced.
But it should be noted that when we are repairing, we must push in the cover plate and hook the wire, otherwise the cover plate will suddenly fall off and hit one's own hands. You must know that the weight of the cover plate is not light. .
Anatomical diagram of the brake cylinder (as shown above)
1. Air inlet
2. Cover
3. Diaphragm
4. Support plate
5. Return spring
6. Shell
7. Fixing bolts
8. Shell putter
9. Connecting rod
10. Clamping band
11.Bolt
Email: