Is pea polyetheramine harmful to engine oil?Does polyetheramine hurt the engine?

pea polyetheramine is not only harmless to engine oil, but also beneficial to engine oil. Pea polyether amine can improve the quality of oil in fuel engine oil, making the oil solubility of the engine oil very good, neither precipitation nor stratification, making the engine oil burn more fully and completely in the cylinder. It not only increases the anti-knock performance of the engine oil, but also increases the dynamic performance of the vehicle. The noise of the vehicle engine can be effectively reduced, and the wear of the vehicle is also reduced.

Does polyetheramine hurt the engine?

Polyetheramine is good for the engine, but it can also hurt the engine. If the polyetheramine fuel oil is added excessively or the period of addition is short, not only will it not be able to remove the carbon deposits of the engine, it will also increase the carbon deposits of the engine, and cause engine jitter and increased vehicle fuel consumption. When adding polyetheramine, it must be added in a proportion of one-thousandth. Polyetheramine cannot be directly added to gasoline. Be sure to add polyetheramine fuel oil when the vehicle's fuel tank is empty, and then add gasoline.

Polyetheramine has excellent cleaning, dispersing, demulsification, corrosion inhibition and antioxidant properties. It can inhibit the formation of deposits in automobile fuel injectors, intake valves and combustion chambers. Compared with polyisobutylene amine type gasoline detergent, it not only does not generate deposits by itself, but also can remove deposits formed in the combustion chamber of the original engine. Polyetheramine has very light color and better yellowing resistance, and can be used in jewelry manufacturing. As the curing agent of epoxy resin, polyetheramine has excellent toughness and fatigue resistance after fully cured, and is widely used in adhesives and structural adhesives. Polyetheramine also has a lower viscosity. When applied to epoxy floors or anticorrosive coatings, it can reduce the amount of solvents and reduce the viscosity of the system.