Are the brake pads installed inside and outside? Diagram of the installation of disc brake pads

Brake pads are a very important part. In daily maintenance, ifFindThe brake pads are severely worn and need to be replaced in time. The replacement brake pads are installed on the inner and outer sides of the upper disc in a relative manner. The inner and outer brake pads of some models are the same, so there is no need to distinguish; however, some brake pads are divided into inner and outer parts, and there is an alarm on the inner disc. The disc should be installed inside the caliper, and install it in strict accordance with its inner and outer discs, otherwise it will cause brake failure.

Disc brake pad installation diagram

1. To replace and install the brake pads, you need to lift the car to remove the tires;

2. Remove the screws of the brake calipers, open the brake calipers, and remove the old brake pads;

3. Push the brake piston back in, install the new brake pads, and just snap them in. Pay attention to distinguish the inner and outer brake pads;

4. Reinstall the brake calipers, tighten the caliper screws to the required torque, and then reinstall the tires;

After installation, you need to step on the brake several times. The purpose of stepping on the brake is to eliminate the gap between the shoe and the brake disc and reset the wheel cylinder piston.an examinationBrake FluidWhether the pump is working properly, confirm that it is correct, that is, the brake pads are replaced. Generally, new brake pads need to have a running-in period. Only after the running-in period can it exert its braking effect better and more effectively.