Wiper motor reset adjustment method, wiper motor installation tutorial

The owner is usingWiperwhen,discoverThe operating angle of the wiper brush is different from the previous angle, and the wiper brush cannot return to its original position after it is turned off. This is because the wiper motor has a misalignment problem, just reset the wiper motor.

Wiper motor reset adjustment method:

1. Prepare a screwdriver and two wrenches;

2. Pull up the wiper brush, and do not put the wiper arm close to the front windshield, which may cause damage to the front windshield;

3. Remove the wiper brush, and use soft things such as towels and sponges to pad the wiper arm to prevent scratching the front windshield;

4. Use a wrench to fix the elbow of the wiper arm, and then use the wrench to twist the wiper arm in the opposite direction. If the position of the wiper arm is up, adjust the top of the elbow counterclockwise. If it goes down, adjust the top of the elbow clockwise.

Wiper motor installation tutorial:

1. Install the wiper brush and wiper arm on the wiper motor first, then put the wiper assembly in front of the front windshield, and then turn on the power;

2. See the rotation angle of the wiper brush on the front windshield, and then adjust the wiper arm. When the wiper brushes are at the same angle on both sides of the front windshield, find the positions of the two mounting holes for the wiper motor, and drill two holes under the front windshield;

3. Remove the wiper brush and wiper arm from the wiper motor, and then install the wiper motor under the front windshield. The wiper brush and wiper arm are installed in front of the front windshield.

Pay attention to the vehicleGlass waterIs there any deficiency? If there are some bugs, dust, etc. on the front windshield of the vehicle that affect the vision of the owner, use a wiper to clean it. If the vehicle does not have glass water, the wiper may produce a lot of damage. Noise, and will also cause certain loss to the wiper brush.