How to wash off after spraying rainproof agent

Presumably everyone has heard of car glass rainproof agent, sprayed on car glass, can form a layer of nano protective film on the surface of the glass, and this protective film has a hydrophobic effect. Although the rainproof agent is not corrosive, if it is used incorrectly, the application will be uneven, and the vision will be blurred.In addition, some car owners reported that after spraying waterproof agent,WiperSlippage is not clean. Then a friend asked how to wash it off after spraying rainproof agent, let's take a look at it together.

Waterproofing agent can be used on the front glass or rearview mirror of the car. After spraying the rainproofing agent, the rainwater will form water droplets on the glass. When the volume is large to a certain extent, it will slide down along the glass under the action of gravity. , And also has an anti-fog effect. When the car reaches a certain speed, the water drops on the glass will move upwards under the action of the wind, until it slides out of the roof, so as to avoid rainwater gathering in heavy rain and the situation that the wiper is not clean and affects the line of sight, which greatly guarantees Driving safety.

Sometimes the method of use is incorrect. When the spraying is uneven, the vision will be blurred or the wiper will be slipped. At this time, only the surface rainproof agent can be cleaned. The rainproof agent can be cleaned with organic solvent, chemical cleaner or gasoline, spray the solvent evenly on the glass for wiping, and then rinse it off with clean water. Of course, rainproof agents are still very useful, but they need to be used correctly.

How to use rainproof agent correctly

1. Clean and wipe the dust and stains on the glass surface, and keep it dry;

2. Spray the rainproof agent on the surface of the glass for smearing to ensure even smearing and prevent rain marks from occurring after rain, which will affect the water repellent effect;

3. After the application is completed, wait for 5-10 minutes. After the glass surface is dry, wipe the glass surface with a car wipe or paper towel until the glass is bright.