Lexus maintenance knowledge


Product Overview
Question: The Lexus 400 I bought in 1998 has been working well and has been maintained on time. However, the cold car is not good for the car recently!Sometimes it has to be played several timesmotorJust work. Is there s
Key Features
- Meet or exceed OEM requirements
- 2 years warranty
- Strict quality control
- Complete testing from material to product
Quality Assurance
Chemical Analysis
Hardness Test
Surface Test
Dimension Check
Salt Fog Test
Fatigue Test
Fast worldwide shipping Quality guaranteed
Question: The Lexus 400 I bought in 1998 has been working well and has been maintained on time. However, the cold car is not good for the car recently!Sometimes it has to be played several timesmotorJust work. Is there something wrong? what to do?
Answer: There are two main reasons why the cold car is difficult to start: one is the cylinder compression pressure is low, and the other is the mixture is too rich or too lean.
It is recommended that you use an experimental method: step on half of the accelerator when starting. If it is easy to start, it may be the cause of the mixed gas. The faulty part is generally the fuel injector or the water temperature.sensor; If it is more difficult to start, it means that the mixture is too thin, and the fault may be the oil pump orThrottle. If none of the above happens, it is recommended to go to a specialist shop to check whether the cylinder pressure is normal.
Q: BecauseOil sealAging has caused some oil leakage in the engine (very slight, there are many oil leakages on the engine after driving for about half a year, and it will not drip to the ground). I don't know how to solve this problem. Is it necessary to replace a new oil seal? thanks.
Answer: I will reply to you about the oil leakage of your vehicle engine. I don’t know the location of the vehicle oil leakage. Our standard method to deal with such problems is to clean the relevant parts, and then run the engine to find the exact leakage location before proceeding. repair. Engine oil leakage is generally caused by the aging of the oil seal. When the engine is running at high speed, it may cause poor lubrication. It is recommended to go to a repair shop for repair in time.
Question: My LS400, model year 1993, single airbag, UCF-10, engine fault light is on, code modulation detects that the engine mixture is too thick
Answer: There are two main reasons why the cold car is difficult to start: one is the cylinder compression pressure is low, and the other is the mixture is too rich or too lean.
It is recommended that you use an experimental method: step on half of the accelerator when starting. If it is easy to start, it may be the cause of the mixed gas. The faulty part is generally the fuel injector or the water temperature.sensor; If it is more difficult to start, it means that the mixture is too thin, and the fault may be the oil pump orThrottle. If none of the above happens, it is recommended to go to a specialist shop to check whether the cylinder pressure is normal.
Q: BecauseOil sealAging has caused some oil leakage in the engine (very slight, there are many oil leakages on the engine after driving for about half a year, and it will not drip to the ground). I don't know how to solve this problem. Is it necessary to replace a new oil seal? thanks.
Answer: I will reply to you about the oil leakage of your vehicle engine. I don’t know the location of the vehicle oil leakage. Our standard method to deal with such problems is to clean the relevant parts, and then run the engine to find the exact leakage location before proceeding. repair. Engine oil leakage is generally caused by the aging of the oil seal. When the engine is running at high speed, it may cause poor lubrication. It is recommended to go to a repair shop for repair in time.
Question: My LS400, model year 1993, single airbag, UCF-10, engine fault light is on, code modulation detects that the engine mixture is too thick
| Material | High-tensile steel / forged aluminum |
|---|---|
| Finish | E-coat / powder paint / zinc plating |
| Standards | IATF / ISO-based process control |
| Warranty | 24 months |
| MOQ | 50-100 pcs per reference |
| Lead Time | 25-35 days after PO |
Passenger Cars
SUVs & Pickups
Commercial Vehicles
Off-road Vehicles
Compatible Brands:
Toyota, Honda, Nissan, BMW, Mercedes-Benz, Ford, Hyundai, Kia, Volkswagen, Land Rover, and more...
Request a Quote
Just for B2B inquiries, no retail please. We'll get back to you within 24 hours.

