carBalance barimprovement of!
According to the use and functional requirements, automobile balance bars can be divided into the following categories:
1. Designed and installed at the separate connection between the front axle and the front wheel, which is mainly responsible for controlling the inclination and camber angle of the front wheel;
2.Directional toe balance tie rod (basic parts of the original car)
It is designed to be installed on the lower swing arms of the front wheels on both sides, and the control direction of the front wheels is overall symmetrical.The main function is to control the forward tilt angle of the front wheels and maintainsteering wheelTracking ability.
3. The balance rod is on the top of the front wheel shock tower (commonly known as the top rod of Hong Kong and Macau)
Design and install firstShock absorberThe top of the tower. Its main function is to strengthen the rigidity of the nacelle and the front body, offset the deformation of the frame caused by the centrifugal lateral torsion (severe deformation will cause the tower top to tear), improve the bending ability of the vehicle, increase the bending speed, and reduce the roll angle c due to centrifugal force .
4. Front bottom cross beam balance rod (commonly known as front bottom rod)
Designed and installed in front of the front axle and chassis. Its main function is to improve the front lower beam (Front bridge) The connection strength with the chassis reduces the displacement and deformation of the front axle caused by centrifugal force and body deformation. Its main function is also to improve cornering performance.
5. The balance rod on the top of the rear wheel shock absorber tower (commonly known as the rear ejector rod)
Designed to be installed on the top of the rear shock absorber tower. Its main function is to enhance the strength of the tail box, reduce the lateral deformation caused by the centrifugal force of the rear compartment, reduce the side tilt of the tail box when cornering, and improve the cornering performance of the vehicle.
6.The rear axle suspension enhances the balance tie rod (commonly known as the rear bottom rod)
This design is installed on the frameRear axleThe connection position with the rear chassis. The main function is to strengthen the connection strength between the rear axle and the frame.
7,Frame (body) chassis reinforced balance rod (component)
This design is installed in the middle of the chassis of the frame. The main function is to enhance the overall rigidity of the frame and chassis. According to the design of the vehicle, the frame structure is different, some are omitted, and some are replaced by other structures. Family cars usually don't pay much attention to these equipment, but sports cars are rare.
In addition, in order to improve the overall rigidity of the body and professionally modify the body (in the cockpit) anti-roll brackets and side door reinforced steel beams, they are all necessary modification items for more professional sports.
The material of the balance bar is very delicate and cannot be easily replaced by ordinary steel. It not only needs the lightest weight, but also the hardness of the body material to achieve a harmonious whole with its rigidity and flexibility.
Vehicles with different chassis designs are usually not allowed to change accessories of other models at will. After a serious collision, the related deformed balance bar and its parts should be replaced completely, rather than being completely repaired by heating correction. Otherwise, even if the correction is reset, the change of the material itself will affect the safety and stability of high-speed driving. 
