• Welcome

Brake deviation is what caused the reason? Old driver: If it was because of the brake pad wil be too dangerous

News 6年前 (2018-03-05) 205 Views

Car deviation is a very common phenomenon, including the car running deviation and brake deviation! The former as long as the proper positioning about the four wheel basically solved the problem, and the latter for many reasons, but are inseparable from the tire, suspension and braking system! Like the tire patterns on both sides are not the same, the tire pressure is not the same, resulting in different friction on the ground; suspension system failure, such as tie rod deformation, ball clearance, etc. will cause the car to travel offset, including brake offset!
Some faults caused by brake deviation, but also at the same time derive some other failures, such as the suspension system failure, it will cause abnormal sound, the symptoms of resonance, just because of brake pads caused by brake deviation, often by our Ignored, will eventually bring a lot of traffic safety hazard in the vehicle, because the brake pads are not normal wear and tear will easily consume the brake pads!
Brake pads on both sides due to large differences in the degree of wear, resulting in different braking torque at both ends of the vehicle, resulting in brake deviation. So, what is the cause of brake wear on one side?
First, but the quality of brake off. Due to poor quality, it is easy to cause large differences in the degree of wear on both sides. At the same time, it will cause serious damage to the brake discs, resulting in gullys on the brake discs. Second, brake cylinders on both sides are not synchronized, the return is not normal, resulting in a large brake force. Third, brake disc deformation occurred. Fourth, due to brake calipers brake pads caused by abnormal wear and tear. Abnormal wear brake pads, it is easy to brake the high temperature, resulting in loss of brake pads and scrapped. So when the brake abnormalities should promptly check the status of the brake pads, the first time to rule out the hidden dangers is the right approach!