When the battery of the car is out of power, car owners actually have many ways to start the car. The most common method is to connect the battery to the battery. The positive pole is connected, and the negative pole is connected to the negative pole, so that the power connection between the two vehicles can be completed. However, car owners must pay attention to the need to connect the positive pole first and then the negative pole when connecting the electricity, otherwise the battery may burn out.
The specific method of charging the car battery is as follows:
1. The car owner must prepare the connecting wires of the two batteries before connecting the electricity to ensure that the two connecting wires are in good condition and meet the specifications of the car battery.
2. Secondly, the car owner needs to find a vehicle that can run normally, that is, a car with a battery.
3. After finding this car, the two vehicles need to be connected head-to-head, and during the whole operation, the owner must pay attention to the fact that the engine needs to be turned off.
4. Immediately after that, the wiring can be carried out. The wiring prepared in advance needs to be fixed on the batteries of both sides, and the owner must carefully distinguish the positive and negative poles on the battery, and the wrong wiring cannot be connected. Be sure to connect positive to positive and negative to negative as mentioned in paragraph 1. Because once the connection is wrong, it is likely to cause a short circuit between the components of the two cars.
5. After the wiring is completed, the normal vehicle needs to be started, and then the vehicle that is wired is started, and then the normal vehicle can replenish the battery of the dead vehicle.
Email: