Turn the control ring on the cadillac ct6 joystick to the s position, then release it to turn the fog lights on and off; the control ring will return to its original position; the front lights must be turned on before turning on the rear fog lights; depending on the external lighting conditions , the exterior light will automatically turn on or off.
In terms of appearance, the new car has been replaced by a larger air intake grille, which is suspected to be connected to the headlights on both sides. This is also the common design of new cars in the past two years. The fog lights on both sides have a new design. The style is more dynamic. Turn off the exterior lights After releasing, the knob will return to the "AUTO" position, turn the knob again to turn off the exterior lights to reactivate the "AUTO" mode; the intelligent high beam system is the system that can be turned on or off according to the surrounding traffic conditions . For the vehicle's high beams, the system only activates the high beams when the vehicle's speed exceeds 40 km/h. Headlight High Beam/Low Beam Switch Push the turn signal lever out and release to turn on the high beam; to return to low beam, push the lever again or pull the lever in, then release or pull the lever in lever and release it. Flashing overtaking is to flash the high beams, pull the turn signal stalk inwards and release it.
Email: