Tiggo7Maintenance light elimination steps:
1. Turn off the ignition switch and turn off the car;
2. Find the "menu switching" button on the steering wheel, that is, the button with two overlapping boxes;
3. Press and hold the "menu switching" button, and turn the ignition switch to the "ON" position;
4. After the car is powered on, it will start self-inspection. At this time, keep pressing the "menu switching" button. After the self-inspection is completed, the maintenance light will disappear in about 5 seconds;
5. Restart the car, the maintenance light will no longer be on.
The function of the maintenance light is to record the use of some important accessoriesmileageThe number, like a timer in a sprint race, plays a role in reminding car owners and car maintenance staff. Although the maintenance light has nothing to do with the performance of the car, after the car is maintained, the maintenance must be cleared. Otherwise, when the car parts are replaced next time, the car owner will not be able to accurately know when the new parts are used.
As a consumable, a car needs regular maintenance. Regular car maintenance can improve the performance of the car and prolong the service life of the car. According to the relevant car maintenance test plan, if the car is properly maintained, it can save 11.36% of fuel during driving; and after the car is maintained, the CO emission is reduced by 45.37% when the car is idling.
In addition, it is best not to delay the first maintenance of a new car, because new cars will have a running-in period. During the running-in period, the internal parts of the engine will leave some fine iron filings in the lubricating fluid through contact and friction. Therefore, when the first warranty period is reached, the running-in oil and filter elements in the engine should be replaced as soon as possible to avoid causing greater damage to the car.
Tiggo 7 maintenance light reset steps andTiggo 5It is the same, the specific steps can refer to the following video.
Email: