• Welcome

How to replace car wipers

Blog 4个月前 (01-18) 25 Views

First, preparation is very important.Before starting the replacement, make sure you buywipersThe device is suitable for your vehicle type. It is also necessary to clean the windshield of any debris or dirt to ensure that the entire surface is clean so that the wipers do not scratch the glass when working.

Next, disassemble the oldWiper. Stand the old wiper arm up so that it is perpendicular to the windshield. Then, find a cover almost in the middle of the wiper swing arm and press the cover so that the wiper can be removed from the swing arm.

Installing new wiper blades is also easy. First, peel off the protective film of the rubber strip on the new wiper blade, then align the raised part on the front of the wiper blade with the notch of the swing arm, and snap it in place, so that it is installed in place.

After completing the installation, perform a test. Gently lower the wiper arm so that it fits snugly against the windshield.Then, in the car, pressglass of waterTurn on the water spray switch and try to start the wipers to make sure they are working properly.

Although car wipers are small pieces, they will wear out and age after being used for a period of time, so they need to be checked regularly to see if they are clean and undamaged, and replaced when necessary. Only by regular maintenance and correct replacement of wipers can we ensure driving safety and extend the service life of the wipers.