• Welcome

How often is the wiper rubber rubber changed?To change the wiper is to change the rubber strip or the entire wiper

Blog 3年前 (2021-11-02) 225 Views

In general,WiperThe rubber of the wiper should be replaced every six months or once a year, but it depends on the actual use of the wiper. If the wiper strip is not replaced for a long time, after the aging of the wiper strip, it will slowly affect the frame of the wiper, and the frame will age. Therefore, in order to reduce the impact on the frame of the wiper, it is still necessary to replace it on time and in time Wiper strips.

If the wiper is the original car, and the frame of the wiper is intact, it is recommended to only replace the wiper strip, because the wiper of the original car is of good quality and very strong, and it will be better if the wiper strip is replaced separately Cheaper.

But in fact, we still need to consider the actual situation of the wiper. If the wiper of the original car is aging and hardened, it will be better to replace it completely. Therefore, owners who want to replace the wiper can take a look. What is the current status of the wiper of your vehicle? We are now making a decision.

The wiper seems to be just a small part of the vehicle, but it is actually an important part. The windshield wiper is installed on the windshield of the car, and is mainly used to remove rainwater and dust attached to the front windshield, which can improve the visibility of the driver and improve the safety of the car.

Therefore, you should pay attention to the quality of the wiper in your daily life, and repair it in time when it fails. In daily maintenance, you can also extend the service life of the wiper. When the vehicle is being cleaned, you can remove the wiper along the way. Foreign matter and dirt on the rubber strip of the instrument.

If the wiper is not clean, you can repair the wiper, soak the water sandpaper and the removed wiper with clean water, and then use the water sandpaper to polish the wiper. When polishing, you need to polish the two sides of the wiper and appropriate sanding glue. On the front side of the strip, the time should not be too long, about 5 minutes.