WiperIt also needs to be replaced regularly, generally once a year. If it is not replaced for a long time, phenomena such as aging and hardening will occur. When the front windshield is cleaned, phenomena such as dirty cleaning, scratches, and abnormal noise will occur.
How to replace the wiper:
1. Lift the wiper arm up, and then the wiper brush and the wiper arm form a vertical angle;
2. Find the buckle connecting the wiper brush to the wiper arm. After removing the buckle, the wiper brush and the wiper arm will be separated;
3. Pry the hook on the wiper brush, take out the old rubber strip inside, and install the new rubber strip;
4. Press the hook to the new rubber strip and cut off the extra rubber strip;
5. According to the original disassembly sequence, install the wiper brush and wiper arm in reverse.
How to install the long and short wiper
If the wiper is one long and one short, install the long wiper on the main driving position when installing, and the short wiper on the co-pilot side, so that the driver’s vision will not be affected by the wiper. . Some vehicles use the same length of wiper, because the curvature of the front windshield is relatively large, it will not affect the driver’s vision. If this vehicle uses a long and one short wiper, the front windshield will be somewhat The location cannot be cleaned up.
Note for wiper brushes:
1. Don't live withoutGlass waterIn the case of, use a wiper, which will cause damage to the wiper brush;
2. If there are hard things on the front windshield, such as bird droppings and rocks, first remove these things by hand, and then use a wiper brush to clean them;
3. Be sure to use special glass water, do not add water or detergent to serve as glass water, which will affect the cleaning effect.
Email: