What should I do if the taillights are flooded? I believe that many friends will be at a loss when encountering this situation. So next, we will tell you how to deal with the water in the car lights.
If it is a slight water ingress, you don’t have to worry too much. After the car lights are turned on for a period of time, the heat generated is used to make the mist inside to exit the lights through the vent pipe, and the whole process will basically not cause any impact. Of course, we still have a foolish method, using a hot air blower against the camera for a few minutes to remove the moisture inside. But it should be noted that it should be heated evenly during hot air, and never keep it in the same position all the time, otherwise the headlight assembly may be damaged.
If it is serious water ingress, you have to mention it separately, and even goldfish can be raised inside. You need to take apart the lampshade in time, take it apart, and then let the water out to dry. Of course, we also need to check whether there are cracks or leaks in the headlights. If there are any, they will naturally need to be dealt with. But this process is best handled by professionals, after all, the process of disassembling and assembling the lampshade is not allowed to make mistakes (tightness), otherwise it is very likely that there will be water ingress at that time.
Email: