What is your terms of packaging?

We offer brand packing box and neutral packing. We can also offer packing box for brake pads according to your designs.

What is your terms of payment?

Generally, by T/T 30% as deposit, and 70% before shipment.

What is your terms of delivery time?

Generally, it will take 30 to 60 days after receiving your advance payment, it depends on the items and the quantity of your order.

Can you manufacture according to the samples?

Sure, we can develop by the samples or detailed drawings by free.

What is your sample policy?

We can supply the samples free, but the customers have to pay the courier freight cost, the cost will be deducted in your first order.

What’s your the minimal order quantity?

The brake pads MOQ is 100 sets for each item.

Wiper linkage rod installation tutorial diagram, how to repair the wiper linkage rod head

WiperStrike, the motor is ok, after checking againdiscoverIt is the problem of the wiper linkage rod. The linkage rod is rusted and damaged, causing the wiper to be unable to swing. At this time, the wiper linkage rod needs to be replaced, and the replacement requires certain skills. Some friends are not clear. The following is a diagram of the wiper linkage rod disassembly and installation tutorial for your reference.

Installation tutorial diagram of wiper linkage rod

1. Remove the wiper blade,Open the engine cover and unscrew the fixing screws on the cover;

2. Break off the sealing strip of the machine cover, lift the machine cover, unplug the sprinkler pipe connection, and remove the cover plate;

3. Unscrew the screws under the cover and remove the inner plastic plate;

4. Unplug the motor socket and unscrew the screws on both sides of the linkage rod to pull it out;

5. Remove the motor from the old linkage rod, then install it on the new linkage rod, then reinsert the assembly into the rubber hole of the linkage rod, tighten the screws, insert the motor plug, and restore the rubber strip And cover.

WiperHow to repair the ball head of the linkage rod

Since many wiper linkage rod heads are made of plastic, they will easily crack and fall off after a long time of use. A simple and rude repair method is to turn the hole from the back of the ball head, drill through the bowl, and then tighten it directly with a nut. , And just apply some butter when loading.