• Welcome

The correct way to clamp the battery charging clip, the car battery charging clip icon

Blog 2年前 (2021-12-13) 283 Views

Before charging the battery, do not connect the 220V power supply. First, connect the red clip of the charger to the positive pole of the battery and the black clip to the negative pole of the battery. Don't connect it backwards. The charger starts to work after the power is turned on. The battery will be charged according to the 12V/24V automatic identification of the connected battery. After the battery is charged and the power is turned off, first remove the negative clamp of the battery, and then take the positive clamp.

Precautions for car battery charging

1. The first charge of the battery is called the initial charge. The initial charge has a great influence on the service life and charge capacity of the battery. If the charge is insufficient, the charge capacity of the battery is not high and the service life will be shortened; if it is overcharged, Although the electrical performance of the battery is good, it will also shorten its service life. Therefore, the new battery should be charged carefully. The first thing that needs the attention of the car owner is the problem of the first charge.

2. At the same time, some drivers often ignore the supplementary charging of the battery in the car. Because the battery is not fully charged in the car, it is easy to cause the plate vulcanization. If the battery is in a state of depletion for a long time due to charging, the battery plate will slowly vulcanize, which will cause the battery's charge capacity to continue to decrease until it is weak to start, which greatly shortens the service life of the battery.