The battery has been used for a long time, and it is usually lack of maintenance, which is prone to vulcanization, which reduces the capacity of the battery and causes power loss or no power storage. When this happens to the battery, it can be activated and repaired, but it requires professional tools and certain methods. So how do you repair the battery yourself? Let's take a look below.
Correctly activate the battery repair method
1. Water replenishment charging repair method
If the battery lacks water and causes power loss or no electricity, you can use the water replenishment repair method to repair it yourself, and add an appropriate amount of distilled water or repair solution to the battery. The purpose is to dilute the concentration, thereby increasing the solubility of lead sulfate, so that it can be electrolyzed normally react and then charge. If there is no distilled water, you can add pure water, but not tap water, which will cause serious battery self-discharge.
2. Pulse voltage repair method
The use of pulse repair method can eliminate battery vulcanization, and activate repair with instantaneous high voltage. The pulse voltage is high, and the battery repair time is short, but it should be noted that the pulse voltage should not be too large. If the pulse voltage value is too large, it will cause damage to the battery plate, and it should be controlled between 60V-300V.
3. Repair instrument repair method
The vulcanization of the car battery will reduce the battery voltage. If the battery voltage is lower than 10V, the battery will not store power, and it will not charge. At this time, you can use the repair instrument to restore the battery voltage to more than 10V by using the high resistance repair of the repair instrument. , so that the electricity can be charged in, so as to achieve the repair effect.
4. Full charge and full discharge repair method
The full charge and full discharge repair method is a method of fully discharging and repairing the battery after it is fully charged. The full charge and full discharge repair method has a certain repair effect on slightly damaged batteries. At the same time, this method can also effectively activate the active substances in the deep layer of the battery and increase the battery capacity. However, this activation repair method cannot be used frequently, at most once every three months.
Email: