Mainly because the braking performance or sensitivity of the handbrake is not ideal. This is a problem that occurs when the handbrake has been used for a long time. It can be solved by adjusting the operating copper cable of the handbrake. Through the connection between the bottom of the handbrake and the copper cable, the length of the copper cable can be stretched to adjust the tightness.
After the handbrake is pulled all the way, it still can't stop, you can disassemble the inner tight wheel to adjust it yourself. In addition, you can check whether the handbrake is normal. Many people will have problems with the brakes not being able to stop due to excessive use. You can check the position of the car handle. When it is pulled to more than 70%, it is the normal braking position. Many car owners think that the failure of the braking system can be controlled by the handbrake. In fact, this concept is wrong, because the braking force on both sides of the handbrake will be different. If you want to control the system failure through the handbrake, it will easily cause the car to roll over and tilt. danger. If the handbrake is loose, the normal way is to find a repairman to repair it.
Email: