It is because it is related to the power of the car's engine, but it is recommended to start in the first gear, because the engine can give a larger torque in the first gear, and the transmission ratio of the transmission is the largest in the first gear, so the possible torque It is also relatively large.
Want to get started fast. A good coordination of the accelerator and clutch is the key to a good start. First of all, quickly lift the clutch to half linkage. When the car has signs of shaking, stop and lift the left foot and hold the clutch firmly. Then lightly step on the accelerator with the right foot, and the speed reaches about 1300-1500. Continue to slowly release the clutch with the left foot, and continue to oil the right foot synchronously. The oil must be sufficient, otherwise it will be difficult to start. After all the clutches are released, the car will continue to move forward, and the speed will be around 1800-2000. Change to the second gear, and then change gears every 2000. At the start, you can increase the engine speed a little, loosen the accelerator a little faster, and increase the accelerator when the clutch is released. Reasonable selection of gears according to road conditions is the most fuel-efficient, and driving at a constant speed is the most fuel-efficient when road conditions are relatively good.
Email: