Will the gasoline filter shake if it is dirty? Steps to replace the gasoline filter

Will the gasoline filter shake if it is dirty? First of all, we have to know that when the gasoline filter is dirty, there must be no way to ensure that the fuel is clean when it enters the engine cylinder. After all, the gasoline added is not pure (contains impurities) .Over a long period of time, a lot of sediment will accumulate, and even directly block the fuel injection nozzle, resulting in increased fuel consumption and severe shaking.(Explain the reason for jitter). Secondly, the fluidity of gasoline will definitely be affected, which will not only cause a serious decline in the power of the car, but also have a certain chance to affect the service life of some parts, and the maintenance cost will be very high at that time.

Steps to replace the gasoline filter

1. First of all, before removing the gasoline filter, be sure to follow the manufacturingbusinessPerform the specified steps to release the residual pressure in the fuel system. Otherwise, it is easy to cause gasoline overflow, and in serious cases, personal safety may be endangered.

2. Then find the ground wire and mounting bracket screws near the steam filter, and pull them out.

3. In order to catch the dripping fuel, we'd better put a basin under the filter.

4. Then it comes to the part of disassembling the fuel inlet pipe, but we had better pump it with one hand and cover it with a towel with the other hand. After all, the gasoline suddenly overflowed.

5. After removing the oil inlet pipe, remove the oil outlet pipe next to the filter.

6. Then, the old steam filter can be removed directly at this time.

7. Finally, put the new steam filter directly on the fixing frame, and follow the reverse steps to connect the oil outlet pipe, fixing frame screws, oil inlet pipe and ground wire back. Of course, we have to clean the area around the steam filter.

Precautions for replacing the steam filter:

1. In the process of replacing the steam filter, do not smoke or use an open flame nearby, otherwise there will be certain safety hazards.

2. Secondly, when replacing the steam filter, the car oil, engine filter, and air filter must also be replaced.

3. The filter has arrow marks on the inlet and outlet ports, so please do not install it backwards when replacing it.

4. After installation, be sure to develop the habit of checking the sealing of the interface to avoid oil leakage.