What is your terms of packaging?

We offer brand packing box and neutral packing. We can also offer packing box for brake pads according to your designs.

What is your terms of payment?

Generally, by T/T 30% as deposit, and 70% before shipment.

What is your terms of delivery time?

Generally, it will take 30 to 60 days after receiving your advance payment, it depends on the items and the quantity of your order.

Can you manufacture according to the samples?

Sure, we can develop by the samples or detailed drawings by free.

What is your sample policy?

We can supply the samples free, but the customers have to pay the courier freight cost, the cost will be deducted in your first order.

What’s your the minimal order quantity?

The brake pads MOQ is 100 sets for each item.

How often does the air grid change?Is it out of warranty not to change the air filter in a 4S shop?

The air grid generally has a service cycle of 10,000 to 20,000 kilometers, which is greatly affected by the driving environment. If the environment is poor, it needs to be replaced in advance. If the air filter element is not replaced for a long time, the particles in the air cannot be effectively filtered, and the engine will accelerate wear and carbon deposits, shorten the service life of the engine, and may even cause the cylinder to be pulled. Therefore, the air filter element should be replaced regularly to protect it. engine.

Changing the air filter element at a 4S store does not count as out-of-warranty. In addition to the cost of accessories, there are also labor costs for replacing the air filter at a 4S store. So now many people choose to buy it online and replace it by themselves.

It is also relatively simple to replace the air filter element.The following are the steps to replace the air filter:

1. Open the hood and take out the air filter element. Generally, its position is on the left side of the engine, that is, the position above the left front wheel. The air filter element is installed in a black plastic box, and there are two ways to install the air filter element, screw fixing and snap fixing. The snap-in type is easier to take out. You can take it out by gently lifting the two metal clips upward; while the screw-fixed type requires unscrewing the screws on the air filter cartridge, and then take out the air filter.

2. After taking out the air filter element, remove the carbon deposits, dust, etc. inside and outside the air filter element box. Use a rag to remove the dust, remember not to rinse with clean water.

3. When installing a new air filter element, distinguish the front and back sides. There is a raised plastic sheet on the right under the air filter element to prevent the installation of the reverse air filter element. When installing the air filter, the plastic sheet must be inserted into the slot of the filter seat to be installed in place.

4. Finally, install the other components.