• Welcome

Does BMW have to be maintained at 10,000 kilometers?How to clear the maintenance period has expired

Blog 10个月前 (07-21) 62 Views

BMWIt doesn’t have to be 10,000 kilometers before the first maintenance. The first maintenance of 5,000 kilometers is to expel these run-in impurities from the engine early, keep the car in good condition after a few years, and end the running-in period.

The specific maintenance time and mileage of the first warranty depends on the individual usage conditions. Even if the time has not yet arrived, the performance of the oil and filter in the car will drop significantly, which will have a serious impact on the condition of the car.

The first maintenance is free maintenance. The main work is to change the engine oil and filter and carry out routine vehicle inspection items. During the maintenance period, the 4S shop will conduct a comprehensive inspection of the vehicle, such as tire pressure,glass of water,Brake Fluid, antifreeze, whether the chassis is loose, whether the engine and gearbox have oil leakage, etc., except for glass water and tire repair, these items are free. If you must follow the maintenance cycle in the maintenance manual, there is no problem. As long as the maintenance is within the required cycle, it will not be out of insurance. The maintenance interval is 10,000 kilometers or 1 year, and any exceeding will affect the maintenance.

BMW maintenance period has expired how to eliminate

When the BMW maintenance period expires, you can reset the maintenance in the maintenance settings on the multi-function steering wheel. The operation process is as follows:

1. Press the start button of the BMW car, and you can see the maintenance prompt on the instrument;

2. Press the set button on the left side of the multi-function steering wheel, and then press the sel button on the right side of the steering wheel;

3. Then press the cancel button on the steering wheel.

If you can’t operate it, it is recommended to go to a 4S shop or repair shop to find a master to reset the relevant information of the computer with a dedicated decoder.